Valves are the basic gatekeeper of flow control in any piping system. When they are open, they allow flow to pass through them; when they are closed, they prevent flow from passing through them. Fittings connect two or more pipe segments so that the system can move fluids and gases, whether it’s water or fuel, water or oil, or water or oxygen.
Where are Pipe Valves Used?
Pipe valves are often used in commercial and industrial applications. They are used to control the flow of water, gas, or other liquids.
Ball valves are one type of pipe valve. They are named for their spherical shape. The sphere has a hole in it that allows liquid to flow through when the valve is open.
A variety of devices exist for regulating pressure within carrying gases or fluids. Some examples include bellows, diaphragm seal devices, piston controls, butterflies, globes, needles, plugs, pinch-off clamps, cartridge faucets, and nozzle plugs.
Advantages of Compression Ball Valves
These are one of the most versatile types and can be used for a wide variety of applications, including shutting off, throttling, and regulating flow. Here are just a few of the advantages:
- They have a very tight seal, which makes them ideal for use in applications where the leakage is not tolerable.
- The design allows for smooth operation with very little friction.
- They are very easy to maintain and repair.
- Their construction makes them resistant to many types of corrosion. They are also less likely to fail due to thermal stress or high pressure.
- They often do not require specialized tools for installation or removal; they may only need an Allen wrench to tighten or loosen the set screw holding them in place.
- Another advantage is that they can be opened and closed repeatedly without wearing out like other types of fittings might do over time.
- Finally, because they have no moving parts, these can last much longer than other types of fittings without needing any additional maintenance or service work done on them – making them one of the most cost-effective solutions available today!
- These can save you money by lasting longer, requiring less maintenance and replacement, etc.
How to choose the right piece?
Here are a few things to keep in mind when choosing the right ball valve for your needs:
They come in a variety of sizes. Choose one with an opening diameter that matches your desired rate, or install two ball valves side-by-side to achieve desired flow rates on opposite sides of the valve body.
Remember that these typically have male threads and will only fit into female threads. When selecting an application, take note of whether you’ll be able to position the pipe so it’s easier to connect without fittings or T’s involved.
They come with standard or special threading configurations.
Standard pieces have female threads, so they’ll connect directly to most standard systems. If you have a non-standard or non-standard pipe system, choose special threading.
A ball valve fitting is an essential piece of equipment for anyone working with them. It is highly versatile and can be used in a variety of applications. It is easy to install and use, making it a great choice for both amateur and professional plumbers alike. So if you’re looking for a new addition to your collection, be sure to check out a compression ball valve today! Have the best options here!
Main photo: Super Snapper/unsplash.com